Planning and Conceptualizing Crispy Tofu Packaging Design Using Kansei Engineering Method

Authors

  • Novi Purnama Sari Jakarta State Polytechnic Author
  • Mohamad Rifai Jakarta State Polytechnic Author
  • Kayla Putri Sagita Jakarta State Polytechnic Author
  • Rinda Ayu Febriyanti Jakarta State Polytechnic Author

DOI:

https://doi.org/10.20961/performa.v25i1.2750

Keywords:

Development, Kansei Engineering, Packaging, Principal Component Analysis, Tofu

Abstract

Indonesian society has long consumed tofu as a side dish or snack. A crucial issue identified in the packaging of Tahu Crispy is the use of non-food-grade duplex paper, which absorbs excessive oil, lacks product identity, and has an unattractive design. Therefore, this study aims to determine a suitable packaging design concept for Tahu Crispy. The Kansei Engineering method is employed due to its ability to interpret consumer impressions, emotions, and desires. The Kansei words were grouped using Principal Component Analysis (PCA). A total of 31 Kansei words were obtained through a questionnaire distributed with video stimuli. The data was then processed using R software, generating a design concept based on PCA input.

References

Amanah, D., & Harahap, D. A. (2019). Loyalitas Konsumen: Implikasi dari Diferensiasi Produk dan Nilai Emosional. Jurnal Ilmiah Manajemen Dan Bisnis, 20(1), 15–26. https://doi.org/10.30596/jimb.v20i1.2991

Andrade, C. (2021). The Inconvenient Truth About Convenience and Purposive Samples. Indian Journal of Psychological Medicine, 43(1), 86–88. https://doi.org/10.1177/0253717620977000

Arini, R. W., Wahyuni, R. S., Munikhah, I. A. T., Ramadhani, A. Y., & Pratama, A. Y. (2023). Perancangan Desain Kemasan Makanan Khas Daerah Keripik Tike Menggunakan Pendekatan Metode Kansei Engineering dan Model Kano. Jurnal INTECH Teknik Industri Universitas Serang Raya, 9(1), 42–52. https://doi.org/10.30656/intech.v9i1.5541

Arsita, U., Mika, T., Lestari, M., Annisa, Hismawati, Marwa, & Sapar. (2023). Inovasi Tren Kuliner Tahu Crispy Balado Dalam Membangun Peluang Bisnis Cemilan. Jurnal Pengabdian Masyarakat, 2(2), 56-60. https://journal.pencerah.org/index.php/deepa/article/view/160

Asdi, Y. (2017). Pengenalan Software R. Universitas Andalas. https://matematika.fmipa.unand.ac.id/images/bahan-seminar/pakyudi.pdf

Colwill, J., Childs, T. H. C., de Pennington, A., Rait, J., Robins, T. M., Jones, K., Workman, C., & Warren, S. (2003). Affective design (kansei engineering) in Japan : a report from a DTI International Technology Service Mission (Version 1). Loughborough University. https://hdl.handle.net/2134/22345

Colwill, J., Childs, T., De Pennington, A., Rait, J., Robins, T. M., Jones, K., Workman, C., & Warren, S. (2003). Affective Design (Kansei Engineering) in Japan : A Report from A DTI International Technology Service Mission. Loughborough University. https://hdl.handle.net/2134/22345

Delfitriani, D., Diki, & Uzwatania, F. (2022). Pengembangan Konsep Desain Kemasan Produk Handsanitizer dengan Pendekatan Kansei Engineering. Jurnal Agroindustri Halal, 8(1), 13–20. https://doi.org/10.30997/jah.v8i1.4916

Delfitriani, D., Uzwatania, F., Maulana, I., & Ariyanto, D. (2023). Pengembangan Konsep Desain Kemasan Produk Lealoe dengan Pendekatan Kansei Engineering. Jurnal Agroindustri Halal, 9(2), 229-237. https://doi.org/10.30997/jah.v9i2.7465

Deshwal, G. K., Panjagari, N. R., & Alam, T. (2019). An Overview of Paper and Paper Based Food Packaging Materials: Health Safety and Environmental Concerns. Journal of Food Science and Technology 56(10), 4391–4403. https://doi.org/10.1007/s13197-019-03950-z

Faisal, D., Fathimahhayati, L. D., & Sitania, F. D. (2021). Penerapan Metode Kansei Engineering Sebagai Upaya Perancangan ulang Kemasan Takoyaki (Studi Kasus: Takoyakiku Samarinda). Jurnal Tekno, 18(1), 92-109. https://journal.binadarma.ac.id/index.php/jurnaltekno/article/view/1210

Fathimahhayati, L. D., Halim, C. I., & Widada, D. (2019). Perancangan Kemasan Kerupuk Ikan dengan Menggunakan Metode Kansei Engineering. Jurnal REKAVASI, 7(2), 47-58.

Herudiansyah, G. (2019). Penyuluhan Pentingnya Label Pada Kemasan Produk dan Pajak pada Usaha Kecil Menengah (Ukm) Desa Tebedak II Kecamatan Payaraman Ogan Ilir. Suluh Abdi, 1(2), 84-89. https://doi.org/10.32502/sa.v1i2.2296

Mu’alim, & Hidayat, R. (2014). Re-Desain Kemasan dengan Metode Kansei Engineering. Jurnal Al-Azhar Indonesia Seri Sains dan Teknologi, 2(4), 223. https://doi.org/10.36722/sst.v2i4.156

Kim, Y. T., Min, B., & Kim, K. W. (2014). General Characteristics of Packaging Materials for Food System. In Innovations in Food Packaging (2nd ed., pp. 13–35). Academic Press. https://doi.org/10.1016/b978-0-12-394601-0.00002-3

Kobayashi, M., & Kinumura, T. (2017). A Method of Gathering, Selecting and Hierarchizing Kansei Words for A Hierarchized Kansei Model. Computer-Aided Design and Applications, 14(4), 464–471. https://doi.org/10.1080/16864360.2016.1257188

Mukhtar, S., & Nurif, M. (2015). Peranan Packaging Dalam Meningkatkan Hasil Produksi Terhadap Konsumen. Jurnal Sosial Humaniora, 8(2), 181. https://doi.org/10.12962/j24433527.v8i2.1251

Mutmainah, I., Sonani, N., Wahidhani, E. H., & Rumma. (2022). Persepsi dan Preferensi Masyarakat Terhadap Keputusan Pembelian Produk Ramah Lingkungan. Management Studies and Entrepreneurship Journal (MSEJ), 3(6), 4104–4112. https://journal.yrpipku.com/index.php/msej/article/view/1307

Nagamachi, M., & Lokman, A. M. (2015). Kansei Innovation: Practical Design Applications for Product and Service Development (1st ed.). CRC Press. https://doi.org/10.1201/b18054

Nasution, M. Z. (2020). Face Recognition based Feature Extraction using Principal Component Analysis (PCA). Journal of Informatics and Telecommunication Engineering, 3(2), 182–191. https://doi.org/10.31289/jite.v3i2.3132

Pratiwi, K., Andreyanto, M. T., Asrol, M., & Taufik. (2023). Herbal Beverage Packaging Product Design Using Kansei Engineering. JENIUS : Jurnal Terapan Teknik Industri, 4(1), 12–21. https://doi.org/10.37373/jenius.v4i1.365

Segita, N. E., Putri, K. A. A., Nuryadin, R. N., Nur, Y. L., & Sari, N. P. (2024). Perencanaan Konsep Desain Kemasan Kerak Telor Menggunakan Metode Kansei Engineering. Industri Inovatif : Jurnal Teknik Industri, 14(1), 12-21. https://doi.org/10.36040/industri.v14i1.8033

Putri, R. D. (2020). Pengaruh Pembiayaan Murabahah Dan Musyarakah Terhadap Profitabilitas Bank Umum Syariah Periode 2016-2018. Jurnal Tabarru': Islamic Banking and Finance, 3(1), 48–56. https://doi.org/10.25299/jtb.2020.vol3(1).5310

Ronasih, M. Y., & Widhiastuti, H. (2021). Kualitas Pelayanan, Faktor Emosional dan Persepsi Harga Terhadap Loyalitas Konsumen Melalui Kepuasan Konsumen. In Philanthropy: Journal of Psychology, 5(1), 109-130. https://doi.org/10.26623/philanthropy.v5i1.3303

Sari, N. P. (2019). Perencanaan dan Pengembangan Kemasan: Kansei Engineering. PNJ Press. https://press.pnj.ac.id/?p=518.

Saeed, K., & Nagashima, T. (2013). Biometrics and Kansei Engineering (1st ed.). Springer New York. https://doi.org/10.1007/978-1-4614-5608-7

Shidiqy, D. (2016). Respon Emosional Sebagai Mediasi Pengaruh Visualisasi Desain Kemasan Terhadap Keputusan Pembelian Studi Kasus Pada Pembeli Rokok Sampoerna A Mild di Warung Kopi Waris Tulungagung. An-Nisbah Jurnal Ekonomi Syariah, 3(1), 189–207. https://doi.org/10.21274/an.2016.3.1.189-207

Sinaga, S. (2022). Pengaruh Desain Kemasan terhadap Keputusan Pembelian Produk Biskuit dan Makanan Ringan PT Siantar Top Tbk Pada Siswa Siswi SMA Santa Lusia Bekasi. PANDITA: Interdisciplinary Journal of Public Affairs, 5(1), 51–60. https://doi.org/10.61332/ijpa.v5i1.40

Soikun, T. M., & Ibrahim, A. A. A. (2020). Pendekatan Analisis Formalistik dan Semiotik Visual: Mencari Faktor “Appeal” dalam Watak Animasi Tempatan. Jurnal Gendang Alam (GA), 10(2), 19–38. https://doi.org/10.51200/ga.v10i2.2825

Suzianti, A., & Aldianto, A. (2020). Redesign of Product Packaging with Kansei Engineering: Empirical Study on Small-medium Enterprises in Indonesia. Makara Journal of Technology, 24(2), 65–71. https://doi.org/10.7454/mst.v24i2.2990

Widiati, A. (2019). Peranan Kemasan (Packaging) dalam Meningkatkan Pemasaran Produk Usaha Mikro Kecil Menengah (Umkm) di “Mas Pack” Terminal Kemasan Pontianak. JAAKFE UNTAN (Jurnal Audit Dan Akuntansi Fakultas Ekonomi Universitas Tanjungpura), 8(2), 67-76. https://doi.org/10.26418/jaakfe.v8i2.40670

Zullaihah, R., & Setyawati, H. A. (2021). Analisis Pengaruh Iklan, Identitas Merek, dan Kepuasan Pelanggan Terhadap Minat Beli Ulang (Studi Pada Pengguna Smartphone Merek Oppo di Kebumen). Jurnal Ilmiah Mahasiswa Manajemen, Bisnis dan Akuntansi (JIMMBA). 3(1), 169-184. https://doi.org/10.32639/jimmba.v3i1.774

Downloads

Published

2026-04-27

Issue

Vol. 25 No. 1 (2026): Performa: Media Ilmiah Teknik Industri

Section

Articles

License

Copyright (c) 2026 Performa: Media Ilmiah Teknik Industri

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.